Las Vegas Powder Coatings Blog
How to Clean and Care for Powder-Coated Surfaces
Las Vegas, NV · October 1, 2026
Powder coating is a durable finish, but regular, gentle cleaning helps it keep its color and gloss. The advice below comes from AkzoNobel's Interpon Guidance Note 6 on cleaning and maintenance, written for architectural powder coatings.
The basic routine
- Use warm water with a mild detergent, in a pH range of about 5 to 8.
- Apply it with a soft cloth, sponge or soft natural-bristle brush.
- Rinse thoroughly with clean water afterward so no residue is left on the surface.
What to avoid
- Abrasive cleaners and polishes, which can scratch and dull the finish.
- Solvents containing ketones or esters, which can attack the coating.
- Any stronger cleaner that hasn't been tested first on a small, hidden area.
During construction
Splashes of mortar, plaster or concrete should be cleaned off as soon as possible. Nearby abrasive blasting, such as cleaning masonry, can strip a powder coating, so the finish should be protected during that work.
Why it matters in the desert
Dust and grime that sit on a surface can hold moisture and contaminants against it, and harsh sun makes any damage more visible over time. A regular gentle clean is part of getting the most from any finish. For background on outdoor performance, see our post on powder coating in the desert sun. For the process behind a finish, see how powder coating cure schedules work.
Gentle and regular beats harsh and occasional.
Mild and warm
Warm water and a mild, near-neutral detergent.
Soft tools only
Cloth, sponge or a soft natural-bristle brush, then rinse.
Test first
Try any stronger cleaner on a hidden spot before using it widely.
Sources
- AkzoNobel — Interpon Guidance Note 6: Cleaning and Maintenance — cleaning method, pH range, products to avoid, construction precautions
Have a finish that needs attention?
Reach out and tell us about it.


