Las Vegas Powder Coatings Blog

Powder Coating Cure Schedules Explained: What Happens in the Oven

Las Vegas, NV · November 2, 2026

Liquid paint dries as solvent evaporates. Powder coating works differently: after the powder is applied, the part is heated so the powder melts, flows and cures into a continuous film. How long and how hot is set by the powder manufacturer's cure schedule.

Reading a cure schedule

A cure schedule is a set of time and temperature combinations. As a real example, AkzoNobel's technical data sheet for Interpon A2000 lists:

  • 10 minutes at 400°F
  • 15 minutes at 390°F
  • 20 minutes at 375°F

Lower temperatures need more time, and higher temperatures need less. Every powder has its own schedule, so the data sheet for the specific product is always the reference.

Part temperature, not oven temperature

Cure times on the data sheet are measured at object temperature, meaning the temperature of the part itself, not the oven air. Thick or heavy parts take longer to come up to temperature than thin ones.

What this means for your parts

Because the part must reach the cure temperature, it has to be able to tolerate that heat. That's worth considering for assemblies with components that can't take oven temperatures.

Powder also has handling requirements before it is ever sprayed. The same data sheet calls for storage at or below 80°F and lists a 12-month shelf life.

Curing is the last step after surface preparation and pretreatment. Once a finish is cured, see our guide on cleaning powder-coated surfaces to keep it looking good. To see how cure, thickness and adhesion are checked after the oven, read how powder coating quality is checked. You can learn more on our powder coating and capabilities pages.

Powder doesn't dry. It cures, and the part temperature sets the clock.

Follow the data sheet

Each powder has its own time and temperature schedule.

Measure the part

Cure is based on object temperature, not oven air.

Check heat tolerance

Parts must handle the cure temperature.

Sources

Wondering if your parts can be powder coated?

Contact us and we'll talk it through.

Call Now Button