Las Vegas Powder Coatings Blog

Powder Coating in the Desert Sun: Understanding AAMA 2603, 2604 and 2605

Las Vegas, NV · September 1, 2026

Southern Nevada is a tough place for any exterior finish. On July 7, 2024, Las Vegas reached 120°F, the hottest temperature on record for the city according to the National Weather Service. Heat and strong ultraviolet light both work on coatings over time, which is why the specification behind an architectural finish matters.

Three specs, three performance tiers

For coatings on architectural aluminum such as window frames, storefronts and curtain wall, the most common references are AAMA 2603, 2604 and 2605, now published by the Fenestration and Glazing Industry Alliance (FGIA). The FGIA store lists the current 2026 editions. A summary from the Aluminum Extruders Council describes the tiers this way:

  • AAMA 2603: the entry-level spec, with 1 year of South Florida exposure testing.
  • AAMA 2604: 5 years of South Florida exposure, with color change limited to 5 ΔE units and at least 30% gloss retention.
  • AAMA 2605: 10 years of South Florida exposure, with color change limited to 5 ΔE units and at least 50% gloss retention.

Why Florida?

South Florida is used as the benchmark because of its intense sun, heat and humidity. The specs are a common yardstick, not a promise of a specific service life at any one site.

What this means for a project

The spec is chosen by whoever writes the project requirements, usually the architect or owner. Higher tiers are typically called for on commercial and high-visibility exterior work, while interior or less exposed parts may not need them. The coating supplier's documentation shows which spec a given product meets.

For more on how coatings are tested, see our post on what ASTM B117 salt spray hours mean. To keep any exterior finish looking its best, read our guide on how to clean powder-coated surfaces. Our powder coating page has more about our services.

In the desert, the spec on the paperwork shows up years later on the building.

Check the spec

Ask which AAMA spec, if any, the coating is certified to.

Match the exposure

Exterior, sun-facing work generally calls for higher-tier specs.

Read the edition

The FGIA store lists the current 2026 editions of each spec.

Sources

Planning exterior metalwork?

Contact us to talk about finish options for your project.

Call Now Button